Protetik Diş Hekimliğinde 3D Yazıcıların Kullanımı
Özet
Günümüzde, Protetik diş hekimliğinde 3d yazıcılar, daimi veya geçici diş protez yapımında her geçen gün daha fazla kullanılmaktadır. Bu çalışma, diş laboratuvarlarında ve uygulamalarında 3D baskı teknolojisinin potansiyel kullanımlarından ve mevcut sınırlamalarından bahsetmektedir. Ayrıca yeni teknolojik gelişmelerin geleceğe yönelik yansımaları ve üretim yöntemlerinin uzun ömürlülüğüne ilişkin bir değerlendirme de ele alınmaktadır. Diş restorasyonların ekleme yöntemi ile üretimi için gereklilik ve limitasyonları da değerlendirilmiştir.
The use of 3D printers in prosthetic dentistry has become increasingly prevalent for fabricating both permanent and interim dental prostheses. This paper addresses the possible applications and current limitations of 3D printing technology in dentistry facilities and clinics. Furthermore, itadditionally analyzes the potential consequences of emerging technical advancements and assesses the durability of production techniques. A review was also conducted on the necessary requirements and limitations relating to the manufacturing of dental restorations using the additive technique.
Referanslar
Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations: current systems and future possibilities. Journal of the American Dental Association. 2006;137(9):1289-1296. doi: 10.14219/jada.archive.2006.0389.
Lebon N, Tapie L, Duret F, et al. Understanding dental CAD/CAM for restorations - dental milling machines from a mechanical engineering viewpoint. Part A: chairside milling machines. International journal of computerized dentistry. 2016;19(1):45-62.
Ngo TD, Kashani A, Imbalzano G, et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering. 2018;143:172-196.
Scherer MD. The Invention of 3D Printing and Its Impact on Dentistry. Compendium. 2020;41(10):504-507.
Schweiger J, Edelhoff D, Güth JF. 3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing. Journal of clinical medicine. 2021;10(9):2010. doi: 10.3390/jcm10092010.
Attarilar S, Ebrahimi M, Djavanroodi F, et al. 3D Printing technologies in metallic implants: A thematic review on the techniques and procedures. International journal of bioprinting. 2021;7(2):21-46. doi: 10.18063/ijb.v7i1.306.
Pillai S, Upadhyay A, Khayambashi P, et al. Dental 3D-printing: Transferring art from the laboratories to the clinics. Polymers. 2021:13;157. doi: 10.3390/polym13010157.
Buda M, Bratos M, Sorensen JA. Accuracy of 3-dimensional computer-aided manufactured single-tooth implant definitive casts. The Journal of prosthetic dentistry. 2018:120;913-918. doi: 10.1016/j.prosdent.2018.02.011.
Zhang ZC, Li PL, Chu FT, et al. Influence of the three-dimensional printing technique and printing layer thickness on model accuracy. Journal of orofacial orthopedics. 2019:80(4);194-204. doi: 10.1007/s00056-019-00180-y.
Melchels FPW, Feijen J, Grijpma DW. A review on stereolithography and its applications in biomedical engineering. Biomaterials. 2010;31(24):6121-6130. doi: 10.1016/j.biomaterials.2010.04.050.
Mohamed OA, Masood SH, Bhowmik JL. Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Advances in Manufacturing. 2015;3:42-53.doi: 10.1007/s40436-014-0097-7.
Chohan JS, Singh R, Boparai KS, et al. Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications. Composites Part B: Engineering. 2017;117:138-149.
Parandoush P, Lin D. A review on additive manufacturing of polymer-fiber composites. Composite Structures. 2017;182:36-53. doi: 10.1016/j.compstruct.2017.08.088.
Lee H, Lim CHJ, Low MJ, et al. Lasers in additive manufacturing: A review. International Journal of Precision Engineering and Manufacturing-Green Technology. 2017;4(3):307-322. doi: 10.1007/s40684-017-0037-7.
Vinogradov P. 3D printing in medicine: Current challenges and potential applications, Ahmad N, Packirisamy G, Dutta R (Ed.), 3D Printing Technology in Nanomedicine içinde. Missouri: Elsevier; 2019. p.1-22.
Quan H, Zhang T, Xu H, et al. Photo-curing 3D-Printing technique and its challenges. Bioactive Materials. 2020;22:110-115. doi: 10.1016/j.bioactmat.2019.12.003.
Jokusch J, Özcan M. Additive manufacturing of dental polymers: An overview on processes, materials and applications. Dental materials journal. 2020;39(3):345-354. doi: 10.4012/dmj.2019-123.
Obregon F, Vaquette C, Ivanovski S, et al. Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering. Journal of dental research. 2015; 94(9 Suppl):143-152. doi: 10.1177/0022034515588885.
Lin WS, Harris BT, Morton D. Use of CBCT Imaging, Open-Source Modeling Software, and Desktop Stereolithography 3D Printing to Duplicate a Removable Dental Prosthesis-A Proof of Concept. Compendium of continuing education in dentistry. 2017;38(8):e5-e8.
Lüchtenborg J, Burkhardt F, Nold J, et al. Implementation of Fused Filament Fabrication in Dentistry. Applied Sciences. 2021; 11(14):6444. doi: 10.3390/app11146444.
Lee D, Lee SY, Kim H, et al. A Hybrid Dental Model Concept Utilizing Fused Deposition Modeling and Digital Light Processing 3D Printing. The International journal of prosthodontics. 2020;33(2):229-231. doi: 10.11607/ijp.6534.
Sabbah A, Romanos G, Delgado-Ruiz R. Impact of Layer Thickness and Storage Time on the Properties of 3D-Printed Dental Dies. Materials. 2021;14(3):509. doi: 10.3390/ma14030509.
Arnold C, Monsees D, Hey J, et al. Surface quality of 3D-printed models as a function of various printing parameters. Materials 2019;12(12):1970. doi: 10.3390/ma12121970.
Lee WS, Lee DH, Lee KB. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system. The journal of advanced prosthodontics. 2017;9(4):265-270. doi: 10.4047/jap.2017.9.4.265.
Tahayeri A, Morgan M, Fugolin AP, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dental materials. 2018;34(2):192-200. doi: 10.1016/j.dental.2017.10.003.
Lebon N, Tapie L, Duret F, et al. Understanding dental CAD/CAM for restorations - dental milling machines from a mechanical engineering viewpoint. Part A: chairside milling machines. International journal of computerized dentistry. 2016;19(1):45-62.
Ngo TD, Kashani A, Imbalzano G, et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering. 2018;143:172-196.
Scherer MD. The Invention of 3D Printing and Its Impact on Dentistry. Compendium. 2020;41(10):504-507.
Schweiger J, Edelhoff D, Güth JF. 3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing. Journal of clinical medicine. 2021;10(9):2010. doi: 10.3390/jcm10092010.
Attarilar S, Ebrahimi M, Djavanroodi F, et al. 3D Printing technologies in metallic implants: A thematic review on the techniques and procedures. International journal of bioprinting. 2021;7(2):21-46. doi: 10.18063/ijb.v7i1.306.
Pillai S, Upadhyay A, Khayambashi P, et al. Dental 3D-printing: Transferring art from the laboratories to the clinics. Polymers. 2021:13;157. doi: 10.3390/polym13010157.
Buda M, Bratos M, Sorensen JA. Accuracy of 3-dimensional computer-aided manufactured single-tooth implant definitive casts. The Journal of prosthetic dentistry. 2018:120;913-918. doi: 10.1016/j.prosdent.2018.02.011.
Zhang ZC, Li PL, Chu FT, et al. Influence of the three-dimensional printing technique and printing layer thickness on model accuracy. Journal of orofacial orthopedics. 2019:80(4);194-204. doi: 10.1007/s00056-019-00180-y.
Melchels FPW, Feijen J, Grijpma DW. A review on stereolithography and its applications in biomedical engineering. Biomaterials. 2010;31(24):6121-6130. doi: 10.1016/j.biomaterials.2010.04.050.
Mohamed OA, Masood SH, Bhowmik JL. Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Advances in Manufacturing. 2015;3:42-53.doi: 10.1007/s40436-014-0097-7.
Chohan JS, Singh R, Boparai KS, et al. Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications. Composites Part B: Engineering. 2017;117:138-149.
Parandoush P, Lin D. A review on additive manufacturing of polymer-fiber composites. Composite Structures. 2017;182:36-53. doi: 10.1016/j.compstruct.2017.08.088.
Lee H, Lim CHJ, Low MJ, et al. Lasers in additive manufacturing: A review. International Journal of Precision Engineering and Manufacturing-Green Technology. 2017;4(3):307-322. doi: 10.1007/s40684-017-0037-7.
Vinogradov P. 3D printing in medicine: Current challenges and potential applications, Ahmad N, Packirisamy G, Dutta R (Ed.), 3D Printing Technology in Nanomedicine içinde. Missouri: Elsevier; 2019. p.1-22.
Quan H, Zhang T, Xu H, et al. Photo-curing 3D-Printing technique and its challenges. Bioactive Materials. 2020;22:110-115. doi: 10.1016/j.bioactmat.2019.12.003.
Jokusch J, Özcan M. Additive manufacturing of dental polymers: An overview on processes, materials and applications. Dental materials journal. 2020;39(3):345-354. doi: 10.4012/dmj.2019-123.
Obregon F, Vaquette C, Ivanovski S, et al. Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering. Journal of dental research. 2015; 94(9 Suppl):143-152. doi: 10.1177/0022034515588885.
Lin WS, Harris BT, Morton D. Use of CBCT Imaging, Open-Source Modeling Software, and Desktop Stereolithography 3D Printing to Duplicate a Removable Dental Prosthesis-A Proof of Concept. Compendium of continuing education in dentistry. 2017;38(8):e5-e8.
Lüchtenborg J, Burkhardt F, Nold J, et al. Implementation of Fused Filament Fabrication in Dentistry. Applied Sciences. 2021; 11(14):6444. doi: 10.3390/app11146444.
Lee D, Lee SY, Kim H, et al. A Hybrid Dental Model Concept Utilizing Fused Deposition Modeling and Digital Light Processing 3D Printing. The International journal of prosthodontics. 2020;33(2):229-231. doi: 10.11607/ijp.6534.
Sabbah A, Romanos G, Delgado-Ruiz R. Impact of Layer Thickness and Storage Time on the Properties of 3D-Printed Dental Dies. Materials. 2021;14(3):509. doi: 10.3390/ma14030509.
Arnold C, Monsees D, Hey J, et al. Surface quality of 3D-printed models as a function of various printing parameters. Materials 2019;12(12):1970. doi: 10.3390/ma12121970.
Lee WS, Lee DH, Lee KB. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system. The journal of advanced prosthodontics. 2017;9(4):265-270. doi: 10.4047/jap.2017.9.4.265.
Tahayeri A, Morgan M, Fugolin AP, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dental materials. 2018;34(2):192-200. doi: 10.1016/j.dental.2017.10.003.
Sayfalar
69-78
Gelecek
30 Nisan 2024
Telif Hakkı (c) 2024 Akademisyen Yayınevi Kitap Portalı
Lisans
LisansNasıl Atıf Yapılır
1.
Özkan Ata S. Protetik Diş Hekimliğinde 3D Yazıcıların Kullanımı. Içinde: Kesim B, editör. Güncel Protetik Diş Tedavisi Çalışmaları VI (Bahar) [Internet]. Türkiye: Akademisyen Yayınevi Kitap DOI Portalı; 2024 [a.yer 13 Temmuz 2026]. ss. 69-78. Erişim adresi: https://omp35.books.akademisyen.net/index.php/akya/catalog/book/3057/chapter/13610
